How to install Spring on your Garage Doors

    When it comes to a garage door repair in Houston, It’s better you call an expert. Our technicians are standing by to take your call.

    CALL NOW: ☎️ (281) 501-6497

    Or, fill out the form and we will contact you as soon as possible

    Spam protection:

    Show us the damage: Send us some photos for a FREE cost estimate.

    Our service areas include: Houston

    How to install Spring on your Garage Doors

    Most of the time garage door springs are taken for granted.

    But this is often because we know almost nothing about it.

    They are very important components for a garage door as they help in the opening and closing of your door.

    When your garage door fails due to a busted spring, it will always be inconvenient.

    Most of the time, all we know is about how it is needed to constantly tune-up our garage doors or how we need professional help for our garage door needs.

    But seldom do we know about how the process is actually done.

    Garage Door spring installation will look easy to the bystander but if you are not well-equipped enough, it might result in some fatalities.

    This being said, let us go and get to know more about the springs used in our garage doors and their installation methods.

    Garage Door Springs: what you need to know

    A spring needs to be proportioned accordingly based to the specifications of your garage door.

    The size, weight, and dimensions of your door have great significance when trying to get the perfect spring for you.

    They contribute a lot especially when it comes to raising or lifting your garage doors.

    Without springs, this task would be a whole lot harder.

    Same day repairs are offered rampantly, almost everywhere, but this could be quite costly.

    When installed properly, you will be able to save a lot more as your springs will last longer and better.

    Garage door repair services may readily be available but you must not take for granted the power of proper installation.

    Before going to the actual process of installation, let us cover some things we need to know in order to make the installation process a success.

    First, before you can install anything, you need to decide which one is the right garage door spring for your needs.

    There are a lot of springs available in the market and not all would be proper or compatible with your garage door.

    There are two types of garage door springs available in the market.

    These are Torsion Springs and Extension Springs.

    These two springs are pretty much easy to identify.

    Torsion Springs are usually found on the top side, over the garage door while Extension Springs are found on the sides of your door lying above the tracks.

    It is important to know this as this will help you know which spring type is compatible with your garage door.

    Before you go to purchase one, make sure also that you have determined the specs of the spring to be used for your garage door.

    You can do this by yourself by researching online how to identify the specs of your garage door or you can ask professional help for this.

    Garage Door Springs Installation Process

    After all this is said and then, we can now proceed to the installation process.

    In order to install your springs onto your garage doors, there are some materials you need to prepare.

    You need to make sure that you have the following:

    • Adjustable Wrench
    • Drill
    • Clamps
    • Hammer
    • Locking Pliers
    • Safety Glasses
    • Winding bars
    • Wrench set & Socket Set

    You may end up using more but this is the most commonly used equipment when installing a garage door spring.

    Procedures might be slightly different depending on the type of spring you are using.

    If you are using a Torsion Spring for your Garage Door, then this is how the installation process is done:

    1. Prepare the door frame. It is extremely important the torsion spring be assembled firmly to the frame of the garage. Thus you need to make sure that your door frame is up to the job.
    2. Lock the door in position using the clamps and the locking pliers. This is done to prevent the door suddenly opening due to the spring causing an injury.
    3. Assemble the springs to the spring tube.
    4. Attach the support plates to the garage door frame firmly.
    5. Mount the torsion springs unto the support plates.
    6. Install the torsion cable
    7. Adjust the spring with the help of the winding bars.
    8. Test the functionality of your newly installed Garage Door Spring.

    For Extension Springs, the installation process is as follows:

    1. Open the garage door completely and lock it in this position with the use of clamps and locking pliers. Just like with the torsion springs, this is to prevent accidents during the installation process.
    2. Install the extension springs. Make sure that the spring is only about an inch stretched even with the garage door being fully opened.
    3. Remove the clamps holding the door together and test the mechanism. If installed properly, this should allow your garage door to function without any problems.


    Knowing how to install a garage door spring and actually installing the spring yourself are two different things.

    Before attempting to do it, make sure you are well equipped with the proper knowledge and tools for the job.

    This being said, it is still highly recommendable to hire professional help for these kinds of jobs.

    If you are looking for someone you can install or replace your worn-out springs for you, then try out GDR Houston Garage Doors.

    We have over 12 years of experience in the emergency repair services and are highly good with their craft.

    GDR is located in Houston and we offer 24-hour repair services which includes installation, repair and maintenance of your garage doors.

    Having serviced a lot of clients both in residential and commercial fields, our company can surely be trusted.

    Get the best quality services you can find for your Garage Door needs right here!

    We hope you enjoyed the above article titled How to install Spring on your Garage Doors. For more great articles such as “How to install Spring on your Garage Doors”, feel free to browse our blog for more great content. Garage Door Repair Houston GDR Tech.

    Recommended articles

    Garage Door Maintenance Checklist 

    Garage Door Maintenance Checklist 

    The easy guide to knowing what needs to be done Your garage door is a heavy machine that is used almost every day of our lives. It is opened and closed almost a thousand times a year. This being said, it certainly needs to be

    Read More »
    Garage Door Moving Slow

    Garage Door Moving Slow

    Is your garage door moving too slowly? This could be due to your doors wearing out over time. Usually, wear and tear related issues have relatively simple fixes which can be done by the average individual. This can also be due to other garage door

    Read More »
    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar