GDR TECH HOUSTON GARAGE DOORS REPAIR

How to Replace Garage Door Rollers And Hinges

    When it comes to a garage door repair in Houston, It’s better you call an expert. Our technicians are standing by to take your call.

    CALL NOW: ☎️ (281) 501-6497

    Or, fill out the form and we will contact you as soon as possible




    Show us the damage: Send us some photos for a FREE cost estimate.

    Our service areas include: Houston

    How to Replace Garage Door Rollers And Hinges

    A garage door is nothing with incomplete hardware parts, especially rollers and hinges.

    These two elements work together to allow the smooth opening and closing of your garage door.

    Rollers, in particular, allow the door to slide smoothly along the metal tracks on both sides of the garage door.

    Without it, your garage door opener will have a hard time raising and lowering the garage door.

    Meanwhile, hinges connect your garage door panels together and allow them to move and bend.

    Another type of hinge that also plays a crucial role in the operation of your garage door is the end hinges.

    End hinges are typically found on the sides of the panels, connecting the door to the tracks.

    If one of your garage door hinges or roller break, expect the faulty operation of your garage door.

    If that’s the case, contact your garage door technician to help you assess and solve the issue.

    We have the expertise and knowledge needed to deal with all kinds of garage door problems.

    At GDR Tech Houston, how to replace garage door rollers and hinges is basic knowledge to us.

    Our expert technicians have specialized in repairing and installing virtually all kinds of garage doors.

    You can trust our expertise because we have been in the garage door service industry for over 12 years.

    You can count on us to help you with your commercial garage door problems.

    What are you waiting for? Dial our local number now, and our team will offer assistance immediately.

    How Rollers and Hinges Work Together

    Each side of your garage door has hinges that have roller mounts.

    These hinges hold the rollers in place while the wheels move along the metal tracks.

    At the same time, they serve as connecting points between the door and the tracks.

    Given this connection between the hardware, you cannot replace your rollers without removing the hinge.

    To show you how to replace garage door rollers and hinges, below are the steps to perform it safely and correctly.

    Replacing the Middle Garage Door Rollers and Hinges

    Before doing anything, disconnect the garage door opener first for safety purposes.

    Manually raise the door and secure it in place.

    This will allow you to work safely and comfortably.

    When everything is set, you can begin removing the nuts and bolts to release the hinge and the roller from the track.

    Insert a new roller into the new hinge and then place the roller back on track.

    Align the holes on the hinge over the bolts on the door and then fasten the new hinge with bolts and nuts.

    Manually open and close the door, and then automatically operate the door to test the new rollers and hinges.

    Replacing the Top Garage Door Rollers and Hinges

    Replacing the top roller is pretty much the same as the previous steps.

    First, remove the bolts and nuts of the hinges and then take off the retainer bracket with the roller.

    Remove the roller and replace it with a new one.

    Return the roller back into the track.

    Align the hinge to the bolts on the door and then tighten the nut to hold the bracket and roller in place.

    Test your new top rollers and hinges by opening and closing the door a few times.

    Replacing the Bottom Garage Door Rollers and Hinges

    Changing the bottom rollers is more complicated than replacing the top and middle rollers.

    Secure the door with a C-clamp around 12 inches below the top of the garage door opening.

    Then, locate where the vertical and horizontal track meet.

    Slightly bend the vertical track near the intersection so that you can force the roller out.

    Once you remove the roller, you can slide a new roller back into the mount and then into the track.

    Restore the section of the vertical track you bent to its original position and then you can finally test your new bottom rollers and hinges.

    Conclusion

    Garage door rollers and hinges are small hardware parts but they are essential in the smooth and flawless operation of your garage door.

    Without them, your garage door won’t offer you any convenience or comfort.

    The safety features of your garage door may also be null.

    So, if you notice that your garage door rollers and hinges are faulty, check them immediately and have them replaced.

    If you need any assistance in how to replace garage door rollers and hinges in Houston, our expert team will be happy to help.

    We specialize in garage door repair and installation services.

    You can call us anytime, so we can provide you with emergency commercial garage door services.

    We hope you enjoyed the above article titled How to Replace Garage Door Rollers And Hinges. For more great articles such as “How to Replace Garage Door Rollers And Hinges”, feel free to browse our blog for more great content. GDR Tech Houston Garage Doors.

    Recommended articles

    How To Fix Garage Door Cable

    How To Fix Garage Door Cable

    A system is often made up of various parts and materials that work together, hand in hand, to make sure that the machine where it is attached is working correctly at all times. Technology has permitted the advanced thinking of a system. At first glance,

    Garage Door Making Noise

    Garage Door Making Noise: How to deal with it

    Having a garage is great, but when it becomes unnecessarily noisy, it can become quite a nuisance. A noisy garage door is never a good thing for anyone. It can inconvenience not only you but as well as those around you. Imagine how your neighbors

    How To Clean Garage Door Sensors

    How To Clean Garage Door Sensors

    Maintaining a house is not an easy task. It requires time, effort, and precision to get the job done. There are different areas around the four corners of the home. Hence, it can be pretty tough for us homeowners to clean it all by ourselves.

    Garage Door Moving Slow

    Garage Door Moving Slow

    Is your garage door moving too slowly? This could be due to your doors wearing out over time. Usually, wear and tear related issues have relatively simple fixes which can be done by the average individual. This can also be due to other garage door

    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar