Table of Contents
There’s so much that goes on behind the functioning of a garage door that most garage owners have likely overlooked.
When problems arise hence, a considerable chunk of their time is spent on trying to locate the source of the problem.
Therefore, one must be thoroughly acquainted with the workings of one’s garage door to save them from an ordeal such as taxing as that.
Garage door tracks, in this respect, are most frequented with the concern of being too loose or tight.
Given that garage doors, in general, are subjected to high and intense pressure almost every day, it is not a rare occurrence for these massive doors to suffer through bouts of complications.
Garage door tracks are built to ensure that garage doors operate smoothly.
They are responsible for the rolling motions that help the doors open and close and are usually situated from the ground to the ceiling, extending on every side of the doorway.
Should these tracks misalign, it could cause a horde of other problems.
When this happens, the most enticing prospect would be to call for a professional; however, others would rather have it fixed by themselves to save them from squandering money.
As such, this list seeks to present several pointers on how to adjust garage door tracks.
Loosen the screws of the tracks.
The first step in fixing the adjustment of the garage door tracks is to loosen first the screws that are fastening the garage door tracks together.
Make use of a screwdriver to do such.
This will bind the tracks to the frame of the garage door.
Adjust the position of the tracks.
Make sure that you are equipped with a rubber mallet for it.
Make use of the mallet and rap the lowermost part of the track until it is perfectly vertical in its alignment. In order to ensure the effectiveness of such a method, utilize a spirit level in order to confirm that the track is now in its proper vertical position.
Tighten the screws of the tracks.
Once you have done the steps above, the next thing to do is to fasten the screws that were previously loosened.
If you have ascertained that the tracks are now in their vertical alignment, tighten the screws once again.
This is to make sure that the tracks do not move again.
Adjust the remaining tracks.
After the successful adjustment of the first track, repeat the same steps again on the other remaining tracks.
Why you need to leave it to the experts
At first, glance, adjusting the tracks may be easy.
However, without the proper training and equipment, it would not work for just any person.
For one, even if you have the right equipment, it does not equate to having the right knowledge in using them.
A rubber mallet may be difficult to handle for some.
It takes years of experience to have a license as well as training to be able to practice in the field of garage door repair.
As such, it is not easy to solve a garage door problem on your own.
For people who do not have the time, it is better to hire a worker to do it.
For people who do have the time but do not know how to work their way around the mechanism, hiring a professional is the best choice.
It does not help to waste time trying to repair something blindly.
For best results, it is recommended that you hire an expert to take a look at your garage door.
With that in mind, leave it to us! Our services guarantee that your garage door will be on track in no time.
We take pride in our ability to provide quality and great results in all the garage door services we provide.
We are licensed as well as insured.
Not only that, but our professionals also boast experience and expertise in the field.
As such, we have been proven and tested by previous customers who have given us great ratings.
Given that, there is no reason for you to doubt! Call us now for the well-being of your garage door.
Contact us today and let us do business!