How to do Aligning Garage Door Sensors for a Smooth and Safe Operation

    When it comes to a garage door repair in Houston, Call an expert. Our technicians are ready to take your call.

    ☎️ (281) 238-5881

    Or, fill out the form.

    aligning garage door sensors

    Garage door sensors are an important safety feature of your garage door. They help to ensure that the door opens and closes smoothly, without causing any damage. If the sensors are not aligned properly, it can cause the garage door stop working correctly. In this blog post, we will show you how to align your garage door sensors for a smooth and safe operation.

    Types of garage door sensors:

    -Infrared garage door sensors

    -Magnetic garage door sensors

    -Photoelectric garage door sensors

    How to align garage door sensors:

    -Check the manual:

    There are different types of garage doors and sensors, which makes manual alignment in the case of misalignment, entirely possible. While starting to align them, it is very necessary to consult your manual. You’ll be given specific instructions on how to align your particular garage door sensors.

    -Test the sensors:

    If you need to test your garage door sensors, this is what you have to do. First of all, read the manual and follow the entire instructions provided that best fit your needs. Test the sensor to cross-examine if it is properly aligned and will close without opening the garage door.

    -Adjust as needed:

    If your garage door opens while you’re driving in, you’ll have to adjust the sensor that allows the door to open and close. In order to adjust them, loosen the screws with a screwdriver that holds the sensor in place. After loosening the screws, move the sensor until it is correctly positioned. Once you have done moving the sensor into position, tighten them back up so they don’t come loose again and won’t create any further complications.

    Tips and tricks for a smooth garage door operation:

    Lubricate the door:

    If you want your garage door to run smoothly, it’s important not to neglect lubrication. You can use a silicone-based lubricant in order to prevent any friction from occurring.

    -Check the springs:

    Another tip for ensuring a smooth garage door operation is to check the springs. If the springs are worn or damaged, will need to replace the springs.

    Check the tracks:

    You never want to run into any complications when it comes to garage door operations. Always be sure that the tracks are in good condition. If they’re damaged, they will need to be repaired or replaced!

    Adjust the opener:

    If you have an automatic garage door opener, you’ll soon learn that there can be a lot more control in this situation when compared to the manual garage door opener. If you want to adjust the opener, consult the owner’s manual and make sure you know how to use your device.

    Testing the sensors:

    Open the garage door:

    First, you will need to open the garage door. This will give you access to the sensors.

    Place an object in front of the sensor:

    Next, you will need to place an object in front of the sensor. This can be anything from a book to a piece of cardboard.

    Check to see if the garage door opens:

    If the garage door opens, this means that the sensor is not properly aligned.

    By following these simple steps, you can align your garage door sensors for a smooth and safe operation. If you have any questions, be sure to consult your garage door expert and sensor manual.

    We hope that this blog post has been helpful in showing you how to align your garage door sensors. Remember, aligning your garage door sensors is an important part of maintaining a smooth and safe operation.

    Thanks for reading!

    5/5 - (1 vote)
    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar